Latest activity Postings Featured content About
-
-
BOurs is plugged all the time at home, previous 2 were as well. No harm done whatsoever. Kev
-
BBarneyBaxter replied to the thread Battery charger not working.No the needle doesn’t move, stays on the same at 12 -1/4 V
-
BHi, I think my battery charger isn’t working (Bailey Bordeaux series 6) With the EHU connected it shows 12 v when I turn the lights on...
-
-
BBarneyBaxter replied to the thread Motor Mover not working.No there is no safety switch or plug. I have removed the control box & connected the 12v leads from the battery straight to the mover...
-
BBarneyBaxter replied to the thread Motor Mover not working.The control unit is faulty, I’ve sent it away for repair, I bypassed the unit & run the motors straight from the battery & it worked
-
BBarneyBaxter replied to the thread Motor Mover not working.When I insert a pencil in the reset hole, the green light comes on for about 10 seconds then goes out, so there must be power going to...
-
-
BBarneyBaxter replied to the thread Motor Mover not working.
-
-
BBarneyBaxter replied to the thread Motor Mover not working.No from a mate, hadn’t used it for a few years
-
BBarneyBaxter replied to the thread Motor Mover not working.There’s no big red key
-
BBarneyBaxter replied to the thread Motor Mover not working.I’ll have a look tomorrow
-
BBarneyBaxter replied to the thread Motor Mover not working.The make of the mover is Truma, no I dont have a multimeter
-
BBarneyBaxter replied to the thread Motor Mover not working.
-
BHi, I have a Bailey pageant Bordeaux, think it’s a series 7, only just had it, the MM is not working, I’ve tried everything & I was...
-
-
Loading...
-
Loading...
-
Loading...
Facebook
Twitter