Hutch's latest activity
-
We rejoined the C&CC so we could go there; and to another C&CC site on our itinerary Before doing so I asked the owner this question and... -
Thanks all. The broken shaft isn’t seized as such as I’d been winding and unwinding it ok to move the ‘van and alter hitch height, I...
-
Hutch replied to the thread Tow car of the year. Anyone ever tow with one?.Yes I had one , fantastic car
-
Do the okey cokey and shake it all about.
-
Did you also clean inside the hitch? I had one that was particularly noisy when clean. But only when starting off and going slow. It...
-
Hutch replied to the thread Swift warranty - happy customer.Andrew,,as much as I like your post, I hope it's not a SPAM posting. Nice to hear a good result.
-
Hutch replied to the thread Snapped Jockey wheel clamp handle.All this information about drilling out and removing the "seized" threaded bit, takes a bit of expertise. It can be done, but take care.
-
If you know anyone who is handy with a tig welder, get them to tack a nut onto the broken shaft, then apply lots of plusgas and heat...
-
In addition to drilling a hole in the stuck bolt, and trying penetrating oil, and in case these don't work I would consider the use...
-
Hi Paul, In your other post, you said about making this a 3 week trip. That would work out at 200+ miles per day, and moving to a...
-
Hutch reacted to Martin_E's post in the thread Powrtouch classic motor mover control unit issues with
Like.
Well done Hutch 👍 -
Hutch replied to the thread Powrtouch classic motor mover control unit issues.I contacted Power touch about replacing the Hex shaft, on one side of my motor mover. They said that they would send out the registered...
-
Hutch replied to the thread Motor movers and the law?.Fred Drift, You have to remember that to use a "Mobility Scooter/buggy" you require to have a reason to use it, NOT a "disability"...
-
Exactly the same happened to me just after we arrived at a site near Grantham a couple of years ago. I doubt that the thread in the...
-
Hutch replied to the thread Anyone recommend an ABS repair epoxy/adhesive?.Coming to a dealer near you.
-
Facebook
Twitter