Recent content by Ian_5074271

Switch available on eBay £5 ordered

Thanks for that, there was not any seals or foam around the fridge to cabinet. But it is going back to the 1998. Maybe I could inch the fridge out again and add a draft proof strip around the frame👍

Thanks for that , I will give it a try. Nothing lost if it breaks, needs replacing anyhow

Well thank you all for your replies and concerns, I’ve finally sorted all the fridge / hob problems both gas and electrical. Hob gas pipe blocked, Fridge burner serviced, spark plug renewed and gas joints tested with gas leak detector. (Thanks for the heads up on the cotton wool filter) I’ve...

On the older style Electrolux fridge RM4236. The illumination light on the rocker off/on switch is not working, the switch is working ok. Is is possible to ease the switch out from the front panel, to replace it, or do you have to pull the fridge out of the cabinet a bit, to release the tabs...

Thanks for the reply. It’s very strange, because the fridge has only ever been used on 240 volts. I know I had both 12 volt and 240 volts at the fridge when I took it out. The caravan is old 1998, Swift Aloutte, but beautiful condition.

Hi, does anyone have any idea why my fridge now has not got a 12 volt supply or 240 volt supply. Also the charger is not working. I removed the fridge to service the burner and at this point both the 12 volt and 240 volt were live at the fridge. When I put the fridge back in, for some strange...

Well done Hutch, so basically just an in line fuse. I wonder what it is rated at. Looking on eBay it looks like I can buy one. 👍

Does anyone know what this is, it seems to be a spring loaded connector. It’s in the red wire running from and near the positive battery terminal. Unfortunately the red wire broke at the bottom end of this connector and the release screw is so rusted I can’t it out, so I am going to have to get...

🤞I’ll give it a try

Hi is it possible to upload pictures to our site, if yo can, could you let me know how please?

Hi I have a pair of new Alko side friction pads. I have had them for about 20 years. I wonder if they will fit the Alko 3004 stabiliser. The markings on them say AL-KO. ARL2. 573914. They are exactly the same diameter, thickness and height as the ones I have taken out of the 3004...

Thanks for all the replies. I thought the pipe work might be blocked as the pipe supplying the hob was blocked, after blowing through with an air pump it works fine. The gas in the caravan has not been used for at least 10 years. Regarding the cotton wooL filter that is in the pipe feeding the...

I don’t suppose it would be ok to take the filter out and see if the gas will light

thanks for the reply, maybe I should leave it in place, I wonder what is stopping the the gas reaching the fridge burner