Martin_E

Latest activity Postings Featured content About

• • M

    Martin_E replied to the thread Swift Challenger 530 Spare Wheel Conundrum.

    If you are not careful it is very easy to dislodge the gas bottle bracket, the screw pull out very easily. It’s a rubbish design!

    May 16, 2025
  • M

    Martin_E replied to the thread Tools.

    This is a good point

    May 13, 2025
  • M

    Martin_E replied to the thread Swift Command (Sargent) Control Panel and Power Supply Firmware Update.

    USB stick is purely to plug in to download the files, the update tool is what the memory card goes into, there is a ribbon cable from...

    May 13, 2025
  • M

    Martin_E replied to the thread Tools.

    An adjustable 10lb hammer, you can just a lot of things with one 🤔🤣

    May 13, 2025
  • M

    Martin_E replied to the thread Swift Command (Sargent) Control Panel and Power Supply Firmware Update.

    The USB stick is only a carrier to put the memory card in, prior to the card going into the tool for update

    May 13, 2025
  • M

    Martin_E replied to the thread Swift Command (Sargent) Control Panel and Power Supply Firmware Update.

    It would be cost prohibitive to buy one for one update, I would think a decent workshop mobile or fixed would do it during a service, it...

    May 13, 2025
  • M

    Martin_E replied to the thread Swift Command (Sargent) Control Panel and Power Supply Firmware Update.

    There is a box with a memory card in that plugs into the rear of the screen and then the PSU, the files on it are various for different...

    May 13, 2025
  • M

    Martin_E replied to the thread Tools.

    Metric adjustable’s, a must have in any tool kit

    May 12, 2025
  • M

    Martin_E replied to the thread Alde heating on Swift 2024 challenger.

    I think it comes down to how the panel is set up, as to what one is master and what one is slave as to how the system reacts to commands

    May 7, 2025
  • M

    Martin_E replied to the thread Reich shower tap.

    It would depend on what model Reich tap you have

    May 7, 2025
  • M

    Martin_E replied to the thread Alternative Trailer Plug.

    This type are very good...

    May 7, 2025
  • M

    Martin_E replied to the thread Motor mover problem (fixed) intermittent operation.

    The switch fault can also be caused by just rotating the switch and not pushing the switch in as you rotate it, it erodes the edge of...

    May 6, 2025
  • M

    Martin_E replied to the thread Running Dometic Under counter Refrigerator.. Gas/Generator/Solar...

    Well done 👍

    May 1, 2025
  • M

    Martin_E replied to the thread Running Dometic Under counter Refrigerator.. Gas/Generator/Solar...

    The wattage is normally shown on the label in the fridge

    • 

    Apr 30, 2025
  • M

    Martin_E replied to the thread New Thetford C260 PCB Connectors..

    New loom me thinks

    Apr 29, 2025

  Show older items
• Loading...
• Loading...
• Loading...