Carver HT Lead + Electrode

[monkeymagic68]

Hi All
Can anyone tell me where i could get a carver ht lead + electrode, and the lead that goes from the piezo igniter to the control valve for a carver 1800 fanmaster heater please.
Many thanks
Pete

 

[Guest]

That is the question?...if you find a source let me know!!

They are like hens teeth to find but odd ones are about on dealers shelfs, it should help to know your 1800 model uses the same igniter as the 3600, 2000, 4000 and 5500 all from 94/5 on. The manual and longer lead fits all, the shorter auto ignition lead just the auto models
I might ask then, what exactly is wrong with the one you have?

 

[monkeymagic68]

Hi Garry
There is no lead at all to the igniter and the ht lead has been cut in two.

 

[Guest]

First, when I hear this it makes me wonder why? it worries me if something more is amiss and that's why it's been 'made safe'!

With that very much in mind, the H/T lead can be joined as long as the joint is kept away from an earth point, on manual piezo ignition, the second lead is an earth.
Carvers electronic ignition uses12v from the vans battery, positive connection is closest to the end of the box.

 

[monkeymagic68]

Cheers Garry