Electric drill for Reich mover and Steadies

[Michael_5072633]

My cordless electric drill works well for the corner steadies but has insufficient power to fully engage Reich mover mechanism. has anyone experienced this problem? If so what make/type of cordless drill is powerful enough to engage the rollers.

 

[JohnKS]

Wouldn't like to use a drill on my motormover. It would brake my wrist. I would stick the handle!

 

[WatsonJohnG]

The Reich has a wind on action rather than the lever on of the Carver clones.

A cheap 18V cordless such as the ones Aldi/Halfords sell would do the job.

I have Bosch and Makita 12V drills/drivers but recently got the above 18v kit which included 1 hour charger,drill,2 18V batteries,sander and jigsaw etc for

 

[Michael_5072633]

The Reich has a wind on action rather than the lever on of the Carver clones.

A cheap 18V cordless such as the ones Aldi/Halfords sell would do the job.

I have Bosch and Makita 12V drills/drivers but recently got the above 18v kit which included 1 hour charger,drill,2 18V batteries,sander and jigsaw etc for

 

[Michael_5072633]

Wouldn't like to use a drill on my motormover. It would brake my wrist. I would stick the handle!

The Reich has a winding mechanism - see my comments to John Watson. But thanks for your thoughts.