Any tips on keeping towing electrics free from corrosion? I had covers but they blew off or were pinched.
Towing Connection Sockets?
- Thread starter BadgerBalls
- Start date
Damian
Moderator
Hi BadgerBalls
It was recommended to me by the company that fitted my towbar,not to use those covers as they have a tendency to trap water.
I would imagine there is a spray that you can use to protect the connections,but not sure what it is.
Adrian
(Ahhh...ive been beaten to it)..Thanks Damien
It was recommended to me by the company that fitted my towbar,not to use those covers as they have a tendency to trap water.
I would imagine there is a spray that you can use to protect the connections,but not sure what it is.
Adrian
(Ahhh...ive been beaten to it)..Thanks Damien
………please bear in mind Silicone Spray is fairly dangerous stuff and should be used and handled with caution.
Here is a link to one particular products safety and handling requirements.
I only used this as an example and all such sprays have similar characteristics.
http://www.free-instruction-manuals.com/pdf/p3931505.pdf
Here is a link to one particular products safety and handling requirements.
I only used this as an example and all such sprays have similar characteristics.
http://www.free-instruction-manuals.com/pdf/p3931505.pdf
I use petroleum jelly (Vaseline).I use a cotton bud & cover all contact poles , sleeves,& surfaces thoroughly with it
Facebook
Twitter