Recent content by greencroft

  1. G

    Russel Hobb Microwave

    Final update. New cooling fan fitted and working. Thank you to ALL for your input.
  2. G

    Russel Hobb Microwave

    I purchased from Spares2Repair. It's due to arrive by Friday
  3. G

    Russel Hobb Microwave

    Sam thanks for the feedback. Finally decided to go for a new motor (£25). We'll see if it works out as cost effective.
  4. G

    Russel Hobb Microwave

    Finally managed to remove microwave. Problem with cooling fan. Checked with DVM and the motor is open circuit. Options are second hand motor for £18 or replace microwave. Many makes use the same crappie motor so could be out of the frying pan and into the fire:(
  5. G

    Black Marks

    Following advice from Car Body restorer I tried 3M Finesse-it 09639. It's a very fine cutting and body polisher. PERFECT with very little effort.
  6. G

    Black Marks

    Tried furniture polish, Fenwicks and Silky but marks are still there.
  7. G

    Russel Hobb Microwave

    I'm an experienced electronics/computer engineer and have repaired microwaves before for family members. I just can't see how to get this microwave out of our Compass Kensington:-(
  8. G

    Russel Hobb Microwave

    Thanks for the info the examples seem to have been fitted differently. Ours is a Compass Kensington. I'll wait until I get home and investigate further. Just want to check if internal fan is running
  9. G

    Russel Hobb Microwave

    Our RH microwave has cutout a couple of times after approx five minutes. I want to check that the internal fan is running. How do you remove from the cupboard it's installed in. It's an Elddis caravan
  10. G

    Black Marks

    Will give Autoglym a try.
  11. G

    Black Marks

    I've tried Fenwicks and Rhino Goo which are both recommended but neither made a bit of difference :-(
  12. G

    Black Marks

    I have a 3 year old Compass Kensington with a few black marks on the body. I've tried a few makes of black mark removers but nothings worked. It seems as though the marks are inside the paintwork. Any suggestions for a remedy would be greatly received. Ken
  13. G

    13 pin socket replacement

    Purchased relay. Picked up ignition on12 volt from F43 (unused). I've also used an in line 15 amp fuse. All sorted and working.
  14. G

    13 pin socket replacement

    Pin 10 update. It has never been connected. See attached photo. The constant 12 volt has been taken from Brown and white stripe wire to left and red wire you can see unattached ends up at pin 10. Any advice where I could tap 12 volt fridge voltage from?
  15. G

    13 pin socket replacement

    All on road electrics now working. Only problem now is Fridge not working and I'm beginning to wonder if it ever worked.
See more
COMPANY
RESOURCES
FOLLOW
Top Bottom