Recent content by Janet_374362349

Thanks everyone. Will try the hair dryer, thinks it should work but not sure which adhesive will be best.

Posted before with no replies, trying again. The rubber/fabric around door opening has curled up at one point.Tried glueing back into position maintaining pressure but without success. Has anyone any idea what will hold the surround in place?

Tried again but just get to page asking what language, after selecting english nothing happens or there is nowhere else to navigate. Should I be on another page? Robert

Tried the connection to Truma instructions but can't navigate away from that page to view any instructions. Help, what do I have to do? Robert

If you look at the roof end which you are threading through the caravan there appears to be two feeds. You probably threaded the wrong one which was difficult to feed through. If this was the case, the correct feed, the second one should be used, you will then find that it is easier to feed and...

I thank you all for your replies I am still confused to my understanding of points 2,3and 4. janet

Thanks John L. Thought that panel containing Master Switch may be common to all caravans, mine is a Bailey Champagne. thanks again for your reply. Janet

This may seem stupid but could someone explain simply the below 1. the RCD switch has to be "on" whether the supply is mains, battery or car? 2. manual states"the control panel is fitted with a master switch enabling the 12V supply to be isolated". This would only be when maintenance or repair...

Take that back, just did a couple of searches and both worked. Don't know what was wrong before. One has to be logged in with password to use the search which I always was. TAll I can suggest is to try again.

I'm not alone then? Did a search once but can't remember now.

Thanks everyone, will get visual advice and report back.

Thanks Mike Calor bottles, one Propane with a connection that has place for a washer and a Butane with a connection that has no place for a washer. The system has a regulator on the .bulkhead

I have similar problem with two small sealed double glazed . house windows. Will replace eventually but they demist with the sun. Janet

Thanks Mike Calor bottles, one butane, one propane. It is the butane that does not have a position for a washer unlike the propane connector which has a washer. The system is one regulator on the bulkhead Janet

Putting my bootles back into van, I notice that one of the pipe connections has a washer whereas the connection on the other bottle does't and by design can't take a washer. Is this correct?