Recent content by oconnj

Hi, It's a full size awning for the size of caravan and it worked fine with my previous Pageant. The difference this time is that the Unicorn rail is a plastic mould, part of the Alu-tech system and not the standard aluminium awning rail. The awning bead looks OK and I've also tried a length...

Yes, got half way from the front and also checked the rail for blockages but found none, seems that the awning is binding, the more of the awning is loaded onto the rail,

Yes, gave it a good dose of silicon spray and also fed the awning from the front of the caravan, (less of a bendy circuit) but only got half way along the rail! Jim

Hi folks, I'm having trouble fitting an awning to my new Unicorn caravan! I've tried lots of silicone spray but with no luck, anyone had the same problem and are there any solutions around? Thanks, Jim

Hi, I'm looking to retire later this year and like you, head south to Spain! Can you let me know whereabouts in Spain you are and what tips and hints might you have for a newbie?? Thanks, Jim O

Hi Jim, Now you mention it I used to get some spin but not too often as I tend to use hard pitches on CC sites. Jim

Hi Jim, My Vectra was the 1.9 CDTI with the 150 engine. Very nice car and the diesel engine made it heavier than the petrol engine Vectras. The car towed very well and with the larger engine we had no problems on hills or motorways, Cheers Jim

Hi Dave, The Monarch is the smallest Pageant and has a MTPLM of 1239kg. I also have one gas cylinder, load my van in a careful way and have been touring for over 8 years. Most of that time with my trusty Vectra! Ah well cest' la vie! Jim

I've got a 1.9 diesel version of the Insignia and tow a Bailey Pageant Monarch. I've just damaged both of my rear shocks and been advised by Vauxhall to upgrade my shocks and springs, cost

Hi, We bought one last year and after a hard night raining in France, the alu roof poles were bent. Other than that it looks good and for the time we use it, good value. very much you get what you pay for! Cheers Jim

Hi, I use a bit of Brasso on a soft cloth and use circular motions until the Brasso is rubbed in. works a treat, Cheers, Jim

HI, The convex goes on the driver's side and the flat goes on the passenger side, Cheers, Jim