rich0805's latest activity
-
Rrich0805 replied to the thread Lidl silicon spray.Your first post isn't clear. If you had said "silicon spray and brake cleaner, both £3.99" there would have been no doubt about what you...
-
RThat's a huge mileage in a brief period! You will spend most of your time on the road rather than enjoying your holiday. It works out at...
-
Rrich0805 reacted to Jcloughie's post in the thread Tow car of the year. Anyone ever tow with one? with
Like.
I don’t know if it would have towed well, but in 1967 I was about to buy one of these for £50 I had to cancel the deal when I was... -
Rrich0805 reacted to Hutch's post in the thread Tow car of the year. Anyone ever tow with one? with Like.
Yes I had one , fantastic car
-
Rrich0805 replied to the thread ATC led problem.Do the okey cokey and shake it all about.
-
RHi Paul, In your other post, you said about making this a 3 week trip. That would work out at 200+ miles per day, and moving to a...
-
Rrich0805 replied to the thread Tow car of the year. Anyone ever tow with one?.I had a Cavalier SRi in the late 90s. I think it was a TCoY at some point. It was certainly a good tow car.
-
Rrich0805 reacted to tiredandemotional's post in the thread Powrtouch classic motor mover control unit issues with Like.
So Powrtouch suggeted buying a new motor mover, however, I sent it off to Andy Martin @ Matronic Industrial Electronic Repair and it was...
-
RHowever, the ability of the tyre does not change by crossing the pond, allowing us to inflate to higher values. What might not be...
-
RUpdate - Used the little grey cells and gave the caravan what it wanted. Two 12v 21w bulbs connected to the fuse box in the caravan and...
-
Rrich0805 replied to the thread Pressure relief valve.Is it mounted in the pipework near where the fresh water comes on to the van? Does it have two wires coming from it? Is it on the water...
-
RIf they are aluminium rivets try using stainless steel rivets
-
RThanks for all the input. I've contacted Elddis and they have put me in touch with one of their approved service centres. The supplier...
-
Rrich0805 replied to the thread Bulkhead Rivets.I think the screws just go in to the board.
-
RHi folks, You may have noticed the site was acting a bit off earlier today. We wanted to quickly explain what happened now that...
Facebook
Twitter