Recent content by Tony_5041741

Hi John,I had this problem. The cause was the gap between roller and wheel was too large. It needs to be 22mm. Adjusted it and all was fine. You can do this using a standard piece of wood - the old 2"x1" planed timber is 22mm thick. There is a clamp screw holding the mover on the bottom member...

Martyn, I have this problem with the complication of a camber on the road giving a deep gutter and the road being a hill itself! I have a Powrtouch mover fitted and always bring the van out forwards and take it in backwards with the jockey wheel as low as possible. I always go down hill out, and...

Hi Martin,we bought this model in Jan after much research for a fixed bed. Very pleased, build quality excellent, washroom is tight and we are average size,bed firm and comfy. Lack of drawers takes some getting used to but more than adequate locker space. Shame there was no alarm or radio fitted...

Yes it does if you have pulled it up to the vertical position. If you are nervous, do what I did to regain confidence, that was to place a brick or suitable chock about 12" behind the wheels with the van on a slight slope pull up the brake then unhitch. Or with the van on a level tarmac surface...

Hi Paul and Ruth Having nearly lost my first van on the day I first got it home as it rolled back down the drive!!! All because I was not told by the dealer that you need to pull the hand brake up vertically as far as it will go, so that it comes on when you unhitch on a slope. Always the van...

Ray, thanks will give it a go. Tony

Dave Useful info. I have a Digix flat screen LCD, as had been recommended on this forum a few weeks back. Had the same intention as you but did not progress as far. However, knowing that the 12v supply in the van can fluctuate I used a meter to find what was supplied via the tv's transformer...

Chris, go for a 921 pump about 13litres /min. Get a good showerhead we have found the one Bailey fits in its Senator Vermont to be the best. It has blue water outlets on it that you can rub to remove the chalky deposits others have small pinholes that you can't get a pin in! Use the gas and...