• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Awning light lens

T

Terrythoro

Hi. I have a series 5 Bailey Pageant Moselle. Can Anyone tell me how to get the cover off the awning light to change a bulb?

The lamp is made by Ring.
 
Terrance

I dont know if it the same , I had a problem with the awning light on our Delta the bulb went and I couldnt find out how to get the cover of. On ours there is a downlighter for the caravan door and a semi circular light above for the awning. After much frustration I discovered there was 2 small plastic clips on the bottom of the housing which held the cover on. By gently pushing them with a screw driver and releasing them I was then able to carefully slide the housing upwards and gain access to the bulds. As I say I am not fammilair with the bailey's and cant guarentee they are the same,
 
Terrance

I dont know if it the same , I had a problem with the awning light on our Delta the bulb went and I couldnt find out how to get the cover of. On ours there is a downlighter for the caravan door and a semi circular light above for the awning. After much frustration I discovered there was 2 small plastic clips on the bottom of the housing which held the cover on. By gently pushing them with a screw driver and releasing them I was then able to carefully slide the housing upwards and gain access to the bulds. As I say I am not fammilair with the bailey's and cant guarentee they are the same,
Click to expand...
Thanks Del But the Bailey lamp is different with no access from the inside of the van.
 
Terrance

The Delta has no access from the inter, which was the problem and no visible screws on either the iside or outside. Have a good close look around the outside to see if there is any recess which could house the holding clips
 
Terrance

The Delta has no access from the inter, which was the problem and no visible screws on either the iside or outside. Have a good close look around the outside to see if there is any recess which could house the holding clips
Click to expand...
OK will do. Thanks
 
hi terence,

i had the same problem with my awning light on my swift and after a phone call to my dealer i was told to squeeze the lens hard and sure enough the lens popped off end of problem. it was a bit daunting as i thought i might break the lens but all was ok
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Back
Top