Connecting 19mm socket head to drill????

[Cadberry]

I am new to caravanning and have decided to get an 18v cordless drill to lower my steadies but where do you get a 19mm socket head that will fit into the drill????

 

[Damian]

Any caravan dealer or Towsure

 

[Rick1]

Hi cadberry try the following link, this is what you require

http://cgi.ebay.co.uk/CARAVAN-CORNER-STEADY-JACK-LEG-DRILL-ADAPTOR-WINDER_W0QQitemZ120420510642QQcmdZViewItemQQptZUK_Campervan_Caravan_Accessories?hash=item1c099f2bb2&_trksid=p3286.c0.m14&_trkparms=72:1683{pipedelimiter}66%3A2{pipe delimiter}65%3A12{pipe delimiter}39%3A1{pipe delimiter}240%3A1318{pipe delimiter}301%3A1{pipe delimiter}293%3A1{pipe delimiter}294%3A50

 

[Zafiral]

Isn't a 18v drill a bit overkill for steadies.

A 12v one would save a bit of weight and reduce the risk of overdoing it. If you lower the steadies too far, you take the weight off the wheels and cause extra stress on the chassis.

 

[Chrisbee]

Isn't a 18v drill a bit overkill for steadies.

A 12v one would save a bit of weight and reduce the risk of overdoing it. If you lower the steadies too far, you take the weight off the wheels and cause extra stress on the chassis.

i have a 24v drill/screwdriver but set the torque to the lowest setting. As soon as the steadies touch the ground the drill stops driving. I then give half a turn with the hand brace.