Fill my water.

[drewswiss]

Hi there.

Having picked up "Digby" (2011 elddis autoquest 180) I'm struggling to find info on how to fill her up with water. I believe I have a 70l onboard tank.??
On the side of the motor I have a cap and underneath I have a square slot with a blue hose bit sticking out top left.
I have a hose this slots into. At the other end is a tube bit I assume slots into a bucket ?? Or a Aqua roll??
I'm wondering if there is an easier way to fill her up with water?
If it is 70l onboard I would have to fill the bucket up twice if it is a 40l one just to fill the tank then fill a third time to have extra?? My friend has a 2008 same model and all he does is stick a hose in the nozel. Surely there is an easy way to fill Digby up?
Cheers.
Andy

 

[Flicka]

Hi Andy - I think you have the Whale filler system which should have a length of hose with a pump attached for external filling.You should still be able to use a standard filler hose direct from a water point / tap, without having the pump/hose piece.

 

[drewswiss]

Many thanks Flicka. You was correct. I'm now confident I can now fill the beast. Thanks so much.
Andy