• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Is this suppose to be loose?

Gagakev

Gagakev

Getting van ready for annual service tonight and noticed this box at the bottom of the fire, is it supposed to be fixed as I can slide it 2 to 3 inches to the right, first photo shows it to the right and second one to the left. It holds the battery i presume for the ignition.

IMG_2763_zps45010f6b.jpg


IMG_2762_zpsc0e00139.jpg
 
It should be fixed, as such.
It simply slides into two raised "flaps" in the base metal of the fire base.
If you take the fire front off you will see it quite easily.
The igniter box should also have a heat shield attached to it.
 
Damian-Moderator said:
It should be fixed, as such.
It simply slides into two raised "flaps" in the base metal of the fire base.
If you take the fire front off you will see it quite easily.
The igniter box should also have a heat shield attached to it.
Click to expand...

Umm whats a heat sheild? Is that the flap to cover the battery? (opened it just for photo purpose)

Thanks Damien
 
Hi Kev,
The heat shield is a piece of galvanised tin plate which fits in a groove on the back of the igniter box and is shaped to come over the top of the box at about a 45 degree angle.

The flap you opened is just the battery cover to stop the battery falling out.
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Back
Top