Motor mover wrench

[McLosi]

Hi, new to motor movers and new van came with one but not with the wrench.
Is this

Spurtar Lug Wrench Extendable Wheel Brace Lugs Wrench Tyre Repair Kit Wheel Nut Remover Torque Wrench 1/2 Drive with 17/19mm and 21/23mm Sockets Storage Canvas Pouch for Car, Van, Truck, Caravan https://amzn.eu/d/dvORLwM

What I need please before I buy the wrong thing.

 

[Jaydug]

Yes! That's what you need. Dpending on how much room you've got between the end of your spindle and the side of the caravan, you may need one of these

 

[McLosi]

Yes! That's what you need. Dpending on how much room you've got between the end of your spindle and the side of the caravan, you may need one of these

Awesome! Thank you.

 

[littlebasher]

I assume your mover uses a hex nut for the engagement?

Later powrtouch evolutions (as an example) use a completely different fitting

 

[McLosi]

I assume your mover uses a hex nut for the engagement?

Later powrtouch evolutions (as an example) use a completely different fitting

The wrench that I use to put the feet down fit... So I think that's a hex nut isn't it?

 

[audiorob]

Have a look on the powrtouch website
Shop - Page 2 of 9 - Powrtouch
as I think the top image on right 'engagement wrench' is the item you need.
I have a different type of mover but a friend finds the need for the extending handle to increase the leverage against the spring on/off.

 

[Jcloughie]

Hi, new to motor movers and new van came with one but not with the wrench.
Is this

Spurtar Lug Wrench Extendable Wheel Brace Lugs Wrench Tyre Repair Kit Wheel Nut Remover Torque Wrench 1/2 Drive with 17/19mm and 21/23mm Sockets Storage Canvas Pouch for Car, Van, Truck, Caravan https://amzn.eu/d/dvORLwM

What I need please before I buy the wrong thing.

If your mover is either 17,19,21 or 23 mm, which is no doubt is, then this will do. Your car wheel spanner may also do the job, but may not have the extra leverage of this one.

John

 

[McLosi]

If your mover is either 17,19,21 or 23 mm, which is no doubt is, then this will do. Your car wheel spanner may also do the job, but may not have the extra leverage of this one.

John

Yes, the guy I bought it from used an extending one to move or down..

 

[otherclive]

Yes, the guy I bought it from used an extending one to move or down..

I used an extending wrench for the mover, as the supplied one requires too much effort. I have also tended to have extending wrenches in with the cars’ jack and spare wheel kits for the same reason.

 

[littlebasher]

The wrench that I use to put the feet down fit... So I think that's a hex nut isn't it?

Sounds like you're good to go then, if it fits both definitely a hex nut !

 

[McLosi]

Sounds like you're good to go then, if it fits both definitely a hex nut !

Ordered so hopefully all good. Thanks.