Nemesis wheel clamp

[Catsparkey]

Can anyone point me in the right direction for a pair of replacement rubbers that fit on the clamp section of the Nemesis wheel clamp or substitute, as mine have pretty well perished and I don't know of a supplier. The clamp is only 18 months into use and to be truthful I'm a little dissappointed with the rather quick wear.

 

[thehoods]

Hi there.

If you get in contact with Purple Line who manufacture the Nemesis, I'm sure they will help you out. They did me when the lock failed on my Saracen hitch lock, whilst on site. They were really helpful and supplied a new lock free of charge.

http://www.purpleline.co.uk
Regards,

Phil.

 

[Barkas]

Hi there Catsparkey. My Nemesis is the same, I've only had it 12 months and the rubbers are completely perished and hanging off, they have not been sitting in the sun so it seems like the damp has got to them and rotted them through.

 

[Catsparkey]

Have e-mailed Purpleline and got response from Kim Customer Services. They do supply the rubbers at a cost of

 

[Bigfoot]

Can I suggest that, in the meantime, you cut a suitable length from an old bicycle inner tube and stretch it over the end of your clamp. I use these bits for all sorts of things.

 

[Catsparkey]

Can I suggest that, in the meantime, you cut a suitable length from an old bicycle inner tube and stretch it over the end of your clamp. I use these bits for all sorts of things.

thanks for the advice.. seems a good idea..