No Power to Status TV booster

Dec 27, 2006
451
0
0
Several things to Check

Firstly is the power supply correctly plugged in to the booster, it is usualy a black cable which plugs into the under side of the booster.

Next is more dificult to check,is there powere in the 12v cable. On our last van the cable had an intermitent fault solution was to get a new cable.

Have you checked the other 12v appliances in the van.

This may sound stupid but is the booster switched on as there are 2 buttons underneath, 1 is on/off the outher is to boost the signal, wouldnt be the 1st time I switched the wrong one.
 
Sep 25, 2008
133
1
0
check the 12v fuse in the distribution panel and if it is older than 2yrs, it will be the fuse inside the unit which is a small 2amp glass fuse.
 

TRENDING THREADS

Latest posts