Repairing a de-laminated floor section

[Phil_5108357]

Hi, i have a small area (about 9" square) of de-laminated floor.

Now i know i will have to remove the carpet to repair, but i was thinking of putting a Laminate floor down anyway.

But can anyone tell me what sort of job it is.

I've been told, i'll need to drill a few holes in the affected area, and inject a resin, is it that easy ???

Thanks in advance,,,Phil.

 

[vauxhall2]

hi,delamination...frightening no if you set out your stall and take your time.this is not a two hour job as stated,when you have finished you will know why they charge so much at the caravan repair shop.i have just done ours a few months ago.i will go through the steps best i can.ours had gone in two places,next to the door entrance and next to the sink four feet away.you will find that delamination is where the floor is used most.ie next to the sink and the door entrance.first decide how much delamination you have,ie.2 feet (old school) or 6 feet,this information is required when you go to order your epoxi resin mix.one mix will cover about 3 feet by 3 feet.got mine from barrons

 

[terrano47]

Phil Ihave some pics if you want to see them of my delam job email me at terrano47@aol.com

 

[Phil_5108357]

hi,delamination...frightening no if you set out your stall and take your time.this is not a two hour job as stated,when you have finished you will know why they charge so much at the caravan repair shop.i have just done ours a few months ago.i will go through the steps best i can.ours had gone in two places,next to the door entrance and next to the sink four feet away.you will find that delamination is where the floor is used most.ie next to the sink and the door entrance.first decide how much delamination you have,ie.2 feet (old school) or 6 feet,this information is required when you go to order your epoxi resin mix.one mix will cover about 3 feet by 3 feet.got mine from barrons