trumatic ultraheat s3002 (p)

[tony-123]

can anyone give me any advice on my heater,we had it on and was working fine then after a few hours we realised it was only blowing cold air.we had it working on electrics and on the thermostat control there is no green light,it flickers on for a second when you turn the dial to set the heat to 500/1000 or 2000kw but no longer any heat coming from the fire can anyone help regards tony

 

[Jaydug]

How is it if the power is switched off at the circuit breaker and left off for a while. Does it work when it's switched back on again?

 

[tony-123]

Hi I have tried it all over the weekend on and
Off and no joy , no light on the thermostat control and the heaters just blowing cold regards tony

 

[Damian]

f you have no green light on the thermostat, the transformer on the ultraheat PCB has failed, or you have lost mains power to the PCB.