VW Touareg towbar 13 pin socket

[Dustydog]

One for Roger maybe.
Thinking about my knee replacement I need to change the access to the socket. It currently sits vertically hidden by the rear bumper. Is it possible to have it moved to a visible horizontal position? I can then attach the plug without kneeling on the floor. Not worried about “ Clean looks”! It’s a Westfalia.

 

[RogerL]

Sounds feasible - just a matter of using the right bracket although you might need to "design" it yourself - I can't tell directly as I have the factory-fit electrically-deployable towbar with the socket horizontal above the swan-neck.

 

[audiorob]

It is possible that something like this could be fitted?
Swan Neck Towbar Socket Mounting Bracket, Plate, Electrics, 7 & 13 pin, Maypole | eBay
or this if there was an appropriate place to bolt it
Connector Socket Mounting Bracket Holder For 7 Pin 13 Pin Caravan Towing Trailer 9515381459299 | eBay
or adapted to fit depending on the tow bar fitment.

 

[Dustydog]

Thanks Chaps,
Mine is a detachable swan neck. However I never bother to detach it so I can so no reason why the mounting plate couldn’t be attached the way Roger’s is. Also good thoughts from Rob. I’ll see my towbar chap and see what he can come up with👍👍

 

[Beachball]

Thanks Chaps,
Mine is a detachable swan neck. However I never bother to detach it so I can so no reason why the mounting plate couldn’t be attached the way Roger’s is. Also good thoughts from Rob. I’ll see my towbar chap and see what he can come up with👍👍

DD I hope your towbar chap can suggest some thing because my socket behind the bumper similar to yours let me know i will get in contact who put mine on thanks

 

[Dustydog]

D

DD I hope your towbar chap can suggest some thing because my socket behind the bumper similar to yours let me know i will get in contact who put mine on thanks

BB is yours horizontal or vertical. Kills my knees to reach mine tucked way up out of site. So stupid!

 

[bertieboy1]

One for Roger maybe.
Thinking about my knee replacement I need to change the access to the socket. It currently sits vertically hidden by the rear bumper. Is it possible to have it moved to a visible horizontal position? I can then attach the plug without kneeling on the floor. Not worried about “ Clean looks”! It’s a Westfalia.

Hi,
The socket may be designed for vertical installation to maintain it's IP integrity.Horizontal installation may jeopordise the IP rating.ie it might not have the same ingress rating. - Worth checking.

 

[Beachball]

BB is yours horizontal or vertical. Kills my knees to reach mine tucked way up out of site. So stupid!

Like yours it tucked way out of site it was a plus at first but now it difficult to reach when in use

 

[Jcloughie]

I sympathise with the problem. Mine is also below the bumper but swings down for use, still a swine to get at. Audiorob, is the way forward if you have a fixed swanneck.

Otherwise get a Disco! 😛


John

 

[Dustydog]

Looks

I sympathise with the problem. Mine is also below the bumper but swings down for use, still a swine to get at. Audiorob, is the way forward if you have a fixed swanneck.

Otherwise get a Disco! 😛

View attachment 2238
John

like yours is horizontal and easily accessed without kneeling / lying on the ground to see it?