• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

wheel cap

J

jeff_374392908

does anybody know where I can find old type hub caps which knock on to the wheel centre of an older type caravan? my wheels are solid with no holes to attach zip ties to the modern trims.any help will be appreciated. regards Jeff
 
I have the same wheels, Jeff and I had the same problem trying to keep my trims on. The first thing I tried was to use those sticky pads for tie wraps, sticking 4 directly onto the solid wheels and the tie wraps thru them and around the trip. However, after a few wet drives, they still came off.

So I followed the advice of another member of my forum which was....

Remove the centre caps of the wheels and drill a 4mm hole in the exact centre of each. Feed a long 3.5 or 4mm bolt thru the hole from the inside and place a couple of nuts on to lock it tight. Refit the centre caps.

Drill a small hole in the exact centre of the wheel trims, fit to the wheel allowing the bolt to feed thru the hole of the trims and affix a couple of nuts to lock it on.

I've never lost a trim since I did this.
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Back
Top