Recent content by DaveT

Would this just be change it at one end. . ? Iv got a 2014 Sterling Eccles

Rookie Mistake So I towed the caravan back three hours last week with the electric cable dragging on the ground 🤬🤬🤬 The damage is quite bad …. Lots of bare wires showing Question is what is the easiest / best fix for this.? Any help would be greatly appreciated

I’ve had someone tell me that I may have the wrong tow ball on my car and I need a long neck tow bar? would this stop it.

On Friday when we arrived at the site for the weekend, when I went to disconnect the van I noticed that the stabiliser wasn’t all the way down !! It was raised about 6 inches !! Now the track up to the site was really bumpy would this have caused this.? Or what would cause this.? Is this...

Mate once again thanks, there is water coming out the clear pipe because i had just drained the tank. I have the connectors to change them and have also decided to change the water inlet socket to help with the pressure. I’ll keep you posted on the outcome thanks 😊

Thanks Damian much appreciated. Do you think this3 way could be why I’m having problems with the water not getting drawn into the tank.?

Thanks for your help, iv just ordered some connectors online, so I can only ask , do you think this has just been a bodge job then? this is our first caravan so learning as we go along. And what is the hole for that the red pipe is coming out of as there’s one near the front as well?

thanks Damian pic 1 is the hot pipe coming from the tank , iv fixed the leak 🙏🙏 pic 2 the hot rpuns down to a 3 way connector ( the red Pipe in pic 3 which is outside) I don’t think this is right.? but I’m not sure The red pipe outside looks like an overflow but it’s between the heater and...

Has anyone got any experience of the setup for an ABI BROOKLYN 2001 . We are experiencing water supply problems which I think may be caused by a previous owner changing the pipes then doing it wrong. The hot water pipe seems to have an overflow between the Truma tank and the taps, if I block...

Im really not sure what is wrong at the moment, I,ll get round to looking at the end of the week for any more clues. it will be completely dry by then so I’ll fill up the flush to start then actually fill the cassette compartment after that. thanks

I have an old whale 12v submersible pump which is very temperamental so my question is... Is it worth getting an in line pump fitted. Are they better or should I just buy a new whale 12v pump

So finally got all my electrics sorted , with and thanks to everyone on here who helped with my previous problems) Only to get parked up on Friday night filled flush toilet up, which then very Quickly drained into the cassette compartment. I didn’t know there was a drain plug. New to this and...

if only it was that easy! The old pipe is about 8 to 10mm and the new one is about 15mm . I don’t want to force it in case ( me and my clumsy hands ) break it

Hi Damian the new one is a Comet Roma Mixer Tap Single Lever Microswitch 33mm Chrome. the old one , the pipes went into the bottom of it

Iv just bought a new tap for my bathroom and I’m not sure what the best way to connect the pipes is, as now only just realised that the new tap Has different connectors. Can anyone help.?