Jcloughie's latest activity

  • Jcloughie
    Jcloughie replied to the thread New Moderator.
    Good luck. Thanks for taking on the batten. John
  • Jcloughie
    Jcloughie reacted to Mel's post in the thread New Moderator with Like Like.
    With Parksy’s sad passing; the forum is in need of another moderator. No-one wishes more than me, that this was not necessary. However...
  • Jcloughie
    Jcloughie reacted to Dustydog's post in the thread Alko brake shoes with Like Like.
    A lot of the brake shoe failures like these are due to misuse. Many people leave the caravan in storage with the handbrake fully...
  • Jcloughie
    Jcloughie reacted to Mr Plodd's post in the thread Over loaded axel! with Like Like.
    I reckon the 85% figure was scientifically arrived at by someone wetting their index finger, sticking it up in the air and saying "85%...
  • Jcloughie
    Jcloughie reacted to ProfJohnL's post in the thread Over loaded axel! with Like Like.
    In the 1990s I knew one of the NCC's directors, and despite that point of contact, I was unable to get a straight answer about the...
  • Jcloughie
    Jcloughie replied to the thread Protec towing cover.
    It is likely that it will fit all Challenger’s of that series regardless of length, as the front end is a constant. John
  • Jcloughie
    Jcloughie replied to the thread Reed switch.
    Try shorting the wires to simulate the reed switch closed, then try the flush. John
  • Jcloughie
    Jcloughie reacted to Lutz's post in the thread Over loaded axel! with Like Like.
    I simply cannot believe that the chassis manufacturers design their product with such a small margin of safety that an overload of, say...
  • Jcloughie
    Jcloughie replied to the thread Over loaded axel!.
    Totally agree. But it seems there are failures. And the response from the manufacturers and Alko seems to be it has been overloaded or...
  • Jcloughie
    Jcloughie replied to the thread Reed switch.
    Hi Gaw5169, and welcome. Make of loo would help, with some pictures of control panel and switch. John
  • Jcloughie
    Jcloughie replied to the thread Over loaded axel!.
    I agree, but the design concept shown in the cross section appears unchanged over the years. Yet collapsing through overloading remains...
  • Jcloughie
    Jcloughie reacted to toad a caravan's post in the thread Over loaded axel! with Like Like.
    I read one where an overloaded fridge was blamed.....that wasn't cool
  • Jcloughie
    Jcloughie reacted to Dustydog's post in the thread Motor mover recommendations with Like Like.
    Powrtouch when contacted within the warranty period only wanted to know the serial number and approx date fitted. Their approved Mobile...
  • Jcloughie
    Jcloughie replied to the thread 1994 Buccaneer Crusader has a small problem.
    Just strip out everything to do with the bottle or bottles connections and renew. You have already found one component 25 years past...
  • Jcloughie
    Jcloughie replied to the thread Whale water connector for serviced pitch.
    Could be an internal pump! But there are containers with larger openings. 😉 LINK John
Show older items
COMPANY
RESOURCES
FOLLOW
Top Bottom