Recent content by Ringhilescu

Good evening, all! Thank you for help. In this case, I really don't understand what's wrong with my Fanmaster when I connect it to 230V. The thermistor is within parameters, the thermocouple closes at 230 degrees Celsius, the ventilation holes are free, the motor rotates at two revolutions, the...

Dear all. Thank you for your help. I have measured the thermistor again at 20 degree Celsius and the resistence is 35 Kiloohms. I am not sure whether is it normal or not.

Good find! I have also investigated what I need, is the value of the thermistor. Can you help me? Thank you!

Hello, Hello! I am Ciprian from Romania and I own an Abbey Vogue GTS 214 caravan, from 1998, with a Carver heating system. I am facing the following problem. When I connect the heating to 220V, and from the control panel it is set to minimum, and the speed is on auto, my resettable thermocouple...

Good to find. I solved the problem and now the refrigerator cools very well. The temperature in the refrigerator is now 1 degree Celsius, and in the freezer -8 degrees Celsius. I checked both LPG and 220V. The solution was very simple. I disconnected the refrigerator from all power sources, took...

Hello friends. I'm Ciprian, I have a caravan Abbey Vogue GTS 214, from 1998, and I'm facing the next problem. My Electrolux refrigerator cools, but does not freeze in the freezer. How can I solve this problem? I have this problem when the refrigerator works both on LPG, at 12v or 220v. Thank you.

What is the purpose of this relay

Good to find you, friends. With your help, we solved this problem as well. The parking brake cable had to be lubricated and easily repositioned. Now everything is perfect. Thank you again for your help. I'll ask you another question. What is the piece in the picture? I mention that I have...

Thanks for help. Next days I will try to fix it. I will tell you the results. Regards, Ciprian

Good found friends. My name is Ciprian, I am from Romania and I am the owner of an Abbey Vogue gts 214 caravan. I have the following problem. On the way, my wheels get quite hot. The problem is with the brake drums, which need to be relaxed. Can you help me with details on this procedure? Thank you

Good to find dear friends. In the end I succeeded. Alone. The problem was that neither you nor I knew that my burner was missing one of the walls, namely the small side on the left. That piece of tin fell because of the rust. The solution was the following, we started from Damian's specification...

Good to find dear friends. Looks like half the problem I solved. The cause was safety, which I replaced. Now, the igniter sparks, the solenoid valve opens and releases the gas. The burner lights up, however, after a few seconds the flame goes out and the red LED lights up on the panel. I checked...

Hello, again. This is all I got. The main control panel, with 3 lights. When I push the Heater button, (last one switch on the right side), the green light is on. Thanks for your help. Regards

Hello, again. Unfortunately, I didn't find the DIN plug. This is all I got. Could be the possibility that my caravan doesn't have the DIN plug, but only that 4 electric wire, as you can see in the images? Thanks

Thanks for joining me in this group.