Recent content by TerryIvybridge

Hi! Just to say this issue is now resolved. A dodgy solennoid being the cause. :)

Supposed to go off grid tomorrow but fridge won't light on gas? Burner box cover off and I can't see any ignition spark with gas on and gas selectected on gas? Any ideas where to look please?

All sorted KJ Thank you. :)

I have to fit both the four wires and the two wires. In this configuration KJ. So just to clarify, on the four, the wires push down into the joint directly from above and then close that back piece up. The Two joint being slightly different, the wires go into the holes and when it is pushed onto...

Thank you so much KJ! That's a big help. I've taken photos and steps to make sure I re-attach in the correct order. Your photo explains all.

Hello again? I've received the pcb and connectors now, been stuck in the Post I assume? No instructions and no help forthcoming from Thetford on how to fit wires into the connectors? Can you help please?

Even better!!!:love:

Oh well done! I've followed you're lead and bought the same? Be here tomorrow. Easy to mount on the wires are they?

Thank you other clive. I'll continue my search.

Must be another way Matin?

Just when you think all is fixed??? One of the electric wires of the flush pcb had broken off last week. I had no other option, I thought?, but to solder the wires onto the pcb directly. I must have overheated the board as the Red wire, the one that came off it's connector, has come off again...

All fixed now . The Micro switch is now working as it should, odd little thing as everytime over winter I had to enter the caravan, I just give it a push. Must have decided to play up these last weeks or so. The Live Red wire had also become detached so back home and I decided to cut the wires...

Seems our little pcb for the flush has given up? Pump was seized but that's usual. Where can the pcb, and connectors be bought from please?

We have, here in Higherwell Farm. Paignton. All working well apart from a dodgy electric flush that needs a new pcb and connections? Looking for a seller of them?

All sorted now thanks to The Washer Wizard, Steve. His patience and determination finally repaired both PCB's. Thanks for everyone's inputs.