• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

1 electric socket stopped working

T

Tinderboy

One of my 3 electrical sockets in my FreeTec 638 has stopped working but the other 2 are fine. Any advice on how to fix the problem would be much appreciated. Thanks
 
Hi Tinderboy
As 2 are working I would doubt it's a fuse, but depends if all 3 are on the same circuit.
So 1st check all fuses & the RCD's are all OK.
If they are OK, could be a simple (but still potentially dangerous)as a connection come adrift at either the RCD or socket. Otherwise, it could be the cable has chaffed on some furniture along it's route. (again potentially dangerous.
Unless familiar with electrics, IMHO get your Dealer (if under warranty) or a qualified Electrician to test it out.
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Back
Top