13 pin adaptor - cables now reach ground

[g1]

The extra length of the adaptor from the single socket on my car to the 2 caravan cables makes them hang down to the ground.

This problem has been mentioned before but this has worked for me.

I overcame this by simply holding each caravan cable out straight and giving it a twist from one end.

This forms a loop which "shortens" the cables and keeps them clear of the ground but still able to "stretch" when turning. It's then a bit like a "curly" cable.

Wes

Worked fine for me

 

[RayS]

A small bungee or velco strap put round cables and hitch handle also works well.

 

[Zbungle]

Or you can pull the grey and black cables back through their respective grommets and into the void within the A-Frame. Here it will be easy to take up any slack and tie them up with a couple of cable ties.

 

[Royston]

I recently discovered that my caravan cables had chafed on the ground whilst towing, since had them replaced , What I do now is loop round the cables with a elastic strap connect them to the the jockey whel , this has stopped the cables from hitting the ground.

Royston