• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

300tdi landrover fuel filter

J

john_5040675

can any one tell me how to bleed the system,after fitting a new filter. the hand book says just fit it and look for leaks haynes book says bleed it no one says how

john the painter
 
With the 300tdi in the 110 Defender I just losen the fuel filters bleed screw and pump fuel to fill it,using the manual lever on the fuel lift pump [Right side of block].

Once fuel is flooding out of the bleeder, close it and then continue to manually pump for a couple of minutes to send any air on its way back to the tank, so purging the injection pump. Then start and idle the engine, this should finish the job without any miss firing.
 
I have been looking on the injecter pump, did not think to look at the lift pump.

ta for the info, will have a look and give it a go

john the painter
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Back
Top