• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

A-Frame Cover

L

Lappy

I want to put an A Frame mounted cycle carrier on my Adria Astella.
What is the best way to remove the plastic covering. Are these screwed on, or glued with mastic underneath?
I would like to be able to remove it without causing damage, so that I can replace it when the carrier is removed.
Thanks in advance for your suggestions
Lappy
 
Give the dealers service department a ring.

Different models can vary anyway, my last caravan the cover was screwed on with two screws either side, under plastic caps.

My latest one is different again, but if you jockey wheel is centrally mounted, then this usually has to be removed by fully unscrewing.
 
The last two which have been continental caravans suitable for an "A" frame bike carrier have been held by two pairs of long vertical machined screws, each pulling on a bent metal clip. The covers I thought were an Al-Ko accessory rather than as common in the UK a van unique cover.
With these sorts of things I find looking with a hand mirror, or taking pictures from underneath with some sort of camera can be very useful.
 
I'll have a look underneath and see if I can see any screws holding it in place. The jockey wheel is mounted centrally, but this has its own plastic cover. The A frame cover is independent to this, so will have its own fixings.
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Back
Top