al ko shock asborbers and kojack

[geoffh]

I have the kojack jack which on my single axle lunar i also have a mover fitted to the front of the axle

what i would like to know is can i still fit the al ko absorbers as well?

 

[RogerL]

You need to identify the brand and model of your mover.

The old Carver Mover, now sold as Truma Classic, fouls the dampers if it's fitted in front of the axle.

The Truma S/SE and PowrTouch movers don't foul the dampers, although adjustment may be needed.

Most of the other brands don't foul but I've a feeling there's one that does.

 

[geoffh]

I have got a powertouch mover but i thought the s/a go behind the axle and thats were the kojack is

or am i wrong?

 

[RogerL]

Dampers are fitted in front of the axle - on caravans - although many motor vehicles have them behind the axle.

As you have a PowrTouch, you can leave it in front of the axle so it doesn't conflict with the Kojack mounting points - to fit the dampers you may need to adjust the PowrTouch slightly.

 

[geoffh]

Dampers are fitted in front of the axle - on caravans - although many motor vehicles have them behind the axle.

As you have a PowrTouch, you can leave it in front of the axle so it doesn't conflict with the Kojack mounting points - to fit the dampers you may need to adjust the PowrTouch slightly.

Thanks Roger

spent too many years in the motor trade and i just thought they went behind the axle

i will go to alko website and read it this time

 

[Jo-AnneFairway5402010]

just bumped it up so craig can read it later

jo

 

[SillyBilly]

I can confirm that on al-ko euro-axles the shocks go in front of the axle