• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Beeping

M

martyn_5124228

We are away in the van for the first time this year and the van has developed an intermittent single beep accompanied by the exterior lights flashing once in time with the beep. Has anyone any ideas what it could be.
 
Could it be the tilt sensor needing to be reset. I believe this can be done from the remote. Had that issue with the last caravan.
 
No Bertieboy. Fridge door shut. Rang Sargent earlier and they think it's the battery in the alarm box needs replacing. Will replace and update post.
 
Just to add that I have fitted a Sargent VLM unit to the van for the LED lights on the van.
Click to expand...

Thats not your problem, I had to do the same. If you are getting the bleep, im 100% certain the issue is conected to your alarm. Im assuming your alarm is Sargent rather than Nordelectronica. If so, although the tilt sensor is automatic, it can be adjusted, I quote

The sensitivity of the tilt sensor can be adjusted as described in the key fob pprogramming section.
Click to expand...

On your remote, press and hold P (program button) to access the three programminbg modes. One long beep is the tilt sensor sensitivity mode. Press the arm/disarm button to set the sensitivity,
One beep = low sensitivity for windy conditions
Two Beeps = standard sensitivity
Three Beeps = High Sensitivity

I suspect your sensor is set at high mode. If at stage one you miss the one long beep, simply cycle around until you come back to it. I think just pressing the P button will cycle the modes.
 
I will have a go when I get home as I don't want to mess up and have the alarm going off on site. Something else I noticed today is that the red light on the PIR is permanently on and doesn't blink when you move around like it used to.
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Back
Top