blinds

[geoff_5040010]

i have a bailey pagent and one of the blinds will not roll up. do i have to take it to a dealer or can i retention it myself. if so what tools do i need and how is it done? thanks in advance(i have faith somebody can give me an answer) geoff

 

[Damian]

Tension Adjustment

Remove plastic cover (if fitted) to locate

tension lugs. The tension lugs have a slot and

are located in the cassette on a 'bayonet'

principle. Insert screwdriver into slot (ensure a

good fit), turn lug clockwise to allow the

spring tension to push the lugs just free of the

cassette. Keep fingers away from screwdriver

tip to avoid accidental injury. Spring can now

have more or less tension applied as required.

If in doubt of tension to be applied, release

all tension and re-start. In which case, with

blind fully wound on the roller, apply 12

revolutions of lug (factory setting).

Refitting is a reversal of removal procedure

Hope this helps