Broken sliding door

[Marie_374225476]

We have a Swift challenger 500SE fixed bed. The second part of the bedroom sliding door has come away from the screws on the roller. When we pull the door the first part comes out but not the second. Can we repair ourselves (we can't work out how to take the door off)?

 

[BrianStAlbans]

Mine done the same , the door should just lift up back onto the runners.

 

[Marie_374225476]

Mine done the same , the door should just lift up back onto the runners.

Unfortunately the screw holes are now so big the door won't stay on.

 

[BrianStAlbans]

Sorry Marie missed the bit about the screw holes. Is it possible to refit them in a different position or glue them in place with a two part adhesive?

 

[Marie_374225476]

Sorry Marie missed the bit about the screw holes. Is it possible to refit them in a different position or glue them in place with a two part adhesive?

We've thought about gluing but would need to get the door off and we really can't work out how to do that!

 

[BrianStAlbans]

If you lift the door up you should be able to pull the bottom of the door out of the guide on the floor this should then allow you to lift the door right off. If that doesn't work I'll go have a look at mine to refress my memory ;O)

 

[Marie_374225476]

If you lift the door up you should be able to pull the bottom of the door out of the guide on the floor this should then allow you to lift the door right off. If that doesn't work I'll go have a look at mine to refress my memory ;O)

I think we may have different doors, mine just slide along the carpet?

 

[BrianStAlbans]

Then sorry I can't help but I'm sure someone else will be able to ;O)

 

[Marie_374225476]

Then sorry I can't help but I'm sure someone else will be able to ;O)

Thanks anyway, it's driving me nuts!!