• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Crystal 2 water pump

N

NigelFR

Hi everyone I have a Bailey Ranger 5 which has a Truma Crystal 2 submersible pump. It attaches to the van and is kept in place by 2 clips. I have broken 1 off (bottom 1). How can I fix it. I believe that it has been updated, although I have found replacement clips ?
TIA Nigel
 
Welcome along.

The "clips" have a cylindrical swivel base which just pushes into the holes on either side. If you can grip the stump with some pliers or something, they should come out with a bit of a pull and a wiggle.
Alternatively, you may be able to screw in a self-tapper a few turns to aid in extraction.

A bit of silicon grease on the new ones wouldn't go amiss.
Good luck! 🙂
 
If you enter into ebay 'truma crystal clips' possible replacements appear as the first listing. As for getting the 'stub' of the old one out, hopefully you can get a hold of the tail end with fine nose pliers, otherwise is there room to drill a fine hole into the centre, aruldite a wire into the hole then use this to pull out the stub?
 
If the clips are like these: https://www.caravantech-shop.co.uk/products/spares-water--gas-electric-etc/truma-crystal-inlet-spares/truma-crystal-2-sercurity-clip-pair#.XShP6PZFyUk

Just use a small screwdriver and push the broken bits out of the back of the fitting, the new ones just push in.
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Back
Top