Fold up sink Retainer

[oldsalt45]

Just wondering if anyone has had the same experience.
We have just purchased an ABI Dalesman but the fold up sink in the wash area is being held up with Velcro which has lost its adhesive strength. We have tried replacing the Velcro after cleaning the area but this has also failed. I have noticed that there seems to have been in the past a roller or grommet arrangement for securing the sink in place. Not having seen the original fitting method it is difficult to find a replacement solution. Has anyone experienced this problem and what was your solution?
Many thanks in advance from someone suffering from a sudden thump on the back at certain occasions when using the facilities.
Andy

 

[WatsonJohnG]

Just wondering if anyone has had the same experience.
We have just purchased an ABI Dalesman but the fold up sink in the wash area is being held up with Velcro which has lost its adhesive strength. We have tried replacing the Velcro after cleaning the area but this has also failed. I have noticed that there seems to have been in the past a roller or grommet arrangement for securing the sink in place. Not having seen the original fitting method it is difficult to find a replacement solution. Has anyone experienced this problem and what was your solution?
Many thanks in advance from someone suffering from a sudden thump on the back at certain occasions when using the facilities.
Andy

Have you tried sticking the Velcro with super glue
I use the sticky velcro in a few places such as on the car dashboard and fixing the Sky remote sensor below the caravan TV and the glue always fails when it gets warm
I superglued the Velcro and its stayed put since

 

[Sproket]

Hi Andy
Would something like this do ?
Sink top retainer
http://caravanalia.com/product/sink-top-retainer/381