Gas BBQ Point

[ian_sadler]

Hi all,

Newbie question.

Just picked up an Abbie GTS 419. It’s got a bbq gas point but no connector or adapter.

Is it a universal fitting and what do I need to connect a gas pipe?

TIA

 

[Jcloughie]

Welcome Ian.

I think there are a few designs. try to find a name on it. Or look in the handbook.

Think about if it will be useful, particularly if you use an awning. They are located in a poor position often covered by the awning. I think it is recommended to only use a shortish tube which limits where the BBQ goes ending too close to van and/or awning making a fat splashing and fire hazard.

John

 

[Hutch]

Welcome Ian.

I think there are a few designs. try to find a name on it. Or look in the handbook.

Think about if it will be useful, particularly if you use an awning. They are located in a poor position often covered by the awning. I think it is recommended to only use a shortish tube which limits where the BBQ goes ending too close to van and/or awning making a fat splashing and fire hazard.

John

Welcome Ian, this is the type I have, go to a website such as lesure direct etc. Although my BBq a cadac states 1 meter hose, I use a 2 meter hose to keep well away from the awning and no problem.

Pardon our interruption...

 

[Mel]

There are different fittings as I discovered when I went to get one from an accessory shop. Best thing is to take a few photos of the BBQ point and take it to the shop. Saves embarrassment when asked what it looks like and my reply is “ not a clue”
Mel

 

[otherclive]

There was a recent post where Dusty (I think) posted picture and link to a connector on his Bailey. I have used some like Hutch posted to be able to use different gas types and cylinder on my Cadac. Quick release so that I can use different gas bottle regulators.

 

[ian_sadler]

Hi Hutch,

Spot on 👍🏼

Thanks,

Ian

 

[Hutch]

Hi Hutch,

Spot on 👍🏼

Thanks,

Ian

Glad to of been some help, normally I am Right to be wrong. 😎