Handbrake type

[pjkillen123]

I removed this from my eddlis crusader 2000 superstorm, the hitch is an alko aks 2000! where can I get a replacement handbrake?

 

[ProfJohnL]

Your local caravan dealer should be able to order one for you.

 

[pjkillen123]

any idea what type it is ? they are no markings on it

 

[Gralay]

You could try a Google search for. ( caravan handbrake handle with gas strut) there is a couple of variations. Hope this helps

 

[Damian]

It does not matter which hitch coupling is used, it is the chassis make that determines which handbrake bits are used.
Yours looks like BPW lever on a BPW chassis, which Elddis used for quite some time.

 

[pjkillen123]

Thanks Damian, it all makes sense now! was focused on the hitch when looking!

 

[Damian]

If you have a good look at your unit there should be a number stamped on it starting with SKU********

Unfortunately BPW was absorbed into Al_Ko a while ago, but the only possible ones I have found are here:

BPW HANDBRAKE LEVER - Trailers & Trailer Parts | ATE UK

Wide range of BPW HANDBRAKE LEVER by ATE - your go-to partner for trailer parts and spares. Order by 4:30 PM for next working day delivery in the UK.

ate-uk.com

As you will see, they are certainly not cheap !!!!

 

[audiorob]

Is it that the piston on the damper has snapped? In which case would it be possible to get a local garage or the like to weld the break? The damper does appear to pivot on the rivets top and bottom which will need greasing before refitting. Just an idea if you are struggling to find a replacement. Other than that you could try a caravan breakers.

 

[pjkillen123]

Both pivots are free, think I'll go for the weld first and check if the ram is ceased!