• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

having a hard time lighting my gas fridge

A

alan_5126663

hi i just wanted to know if anyone could give me a bit of advice on running my fridge on gas,it works fine once u get it light but this sometimes can take me 30 min to get it lit( i know u have ot let the gas to run through a bit) or is it just me without the magic touch? any sugestions would be helpful
 
Our last van had to be spot on level to get the fridge to light eeasily on gas.

Light oven and gas rings first to pull the gas through before you

attempt to light the fridge.
 
Hi Alan,

Agree with PC, if you can light the gas hob - then you know you have gas at the manifold. Remember that the fridge has only a single burner jet - and will need about 10x as long to purge as the hob did - but 30 minutes is excessive.

Assuming that the fridge works OK on gas once lit, you probably need to investigate (by a competent person):

1. The igniter which should be placed 3mm from the jet body - it may have moved

2. The thermocouple / flame failure device - it may need replacing or the threaded joint behind the control knob may be loose

3. You may need to have the burner assembly serviced (and clean the heater tube at the same time) - it may just be sooted up in all the wrong places

4. You may want to read the operating instructions again and make sure you have the lighting process correct

Robert
 
Hi Folks,

Just out of interest, why does the caravan have to be perfectly level for the fridge to light? Is there a level sensor to shut off the gas?

A brief explanation might help me sleep at night... I must get out more!!!

Cheers!
 
When buying our first van the owner told me the van had to be level or the fridge gas would not light! Never queeried why, but used the fixed level in the vans front window as advised and alaways started the gas ok. The level has been moved from van to van as I,m to tight to spend
 
If it's an oldish fridge and the problem is it lights ok but does not stay lit when the knob is released, try this.

Set the control knob to the lighting position and then pull the knob off and use just the spindle to push in while lighting, if you then release it and it stays lit, it's the knob hitting the fasia causing the problem.

Quick and easy solution is to put something in the end of the knob to stop it going on to the spindle quite so far, 1 or 2mm should do it.
 
thanx for all your help and tips, i will put them to good use next weekend as we are off to pickering once again thank you for all your help

alan
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Back
Top