Help with edge trim

[CLUNIE01]

Hi
Was wondering if anyone can help with sourcing the plastic wood grain effect flexible edge trim on interior end panels? Mines have cracks in a few places and looking to replace but can't source it anywhere? Its not the usual glue on veneer trim and really want to replace like for like if possible. See photos for the type of trim. Any help appreciated.

 

[Jcloughie]

Welcome to the forum.


I think you will find it is something like this. Made from plastic and quite supple so odd that it is cracked. If I am right, it pulls out and pushes back in, may need some persuasion with a piece of wood and a mallet. It comes in different widths, no lip, single lip and double lip. After installing it can shrink, so leave it too long and trim after a couple of weeks.

John

 

[CLUNIE01]

Thanks for reply John. It isn't quite like this as the trim isn't a T trim and it just simply glues onto the board edge however I have been looking at this https://www.primaleisure.com/product/1350666/mendip-ash-9mm-tbarb- as it appears to be similar but would need to either cut of the t barb or cut a groove into the board edge! Will continue to do some more research on it. Thanks

 

[Jcloughie]

Thanks for reply John. It isn't quite like this as the trim isn't a T trim and it just simply glues onto the board edge however I have been looking at this https://www.primaleisure.com/product/1350666/mendip-ash-9mm-tbarb- as it appears to be similar but would need to either cut of the t barb or cut a groove into the board edge! Will continue to do some more research on it. Thanks

Pity, because the’T’ trim is easy to fit.

John