• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

how to make mains connection wastemaster

S

sian_5062266

someone posted once a long time ago how one can make a mains adaptor for the aquaroll with a ball valve, I can't find the instructions does anyone out there know how

alwyn
 
If you want to make a mains connection for the fresh water into the van you need the large aquaroll or water container with 2 caps

You buy from a plumbers merchant a torbreck valve and fit it into the side entry after boring the right size hole in the cap

The other cap entry is used for the submersible pump or inboard pump feed
 
If you want to make a mains connection for the fresh water into the van you need the large aquaroll or water container with 2 caps

You buy from a plumbers merchant a torbreck valve and fit it into the side entry after boring the right size hole in the cap

The other cap entry is used for the submersible pump or inboard pump feed
Click to expand...
http://www.screwfix.com/app/sfd/cat/lrgimg_popup.jsp;jsessionid=05PPRW3JQKESWCSTHZOCFFI?productId=14716&imageNo=null&ts=26429
 
I also reckon that if you were to ebay this item the way that some of the sellers have the equipment laid out in the photo you would get a very good idea from that what goes where.
 
Its quite simple

If you look at the pic in the link above the torbeck valve just goes through the hole bored in the side cap,clamps to it with fittings included and the threaded outer end is the right thread to screw on a push fit water connector for the hose
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Back
Top