• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Internal Alarm Sensor

S

Somersetboy

The sensor fitted in my Bailey Pegasus 462 2010 is now emitting a faint buzzing sound could this be a low battery warning if so how do you replace battery. Any help on this subject very much appreciated,
cheers.
 
If it is just a Sargent Alarm, there should be a square opaque window , either head height or floor level, maybe with a flashing light. That is the sensor.

Under one of the front bunks, there could be a Black box, 6 X4 inches, inside there is a battery, 2 screws and a bolt. To lift the top off. That might need replacing.
Sargent have a write up on their website.
 
Do you have a photo of the PIR sensor?
My Bailey PIR contains a 9 v PP3 aka 6LR61 battery which is a backup. When it is approaching the. End of its life the unit will bleep.
Change the battery.
There is a small grub screw on the lower underside. Remove and carefully “hinge “ off the cover. You will then see the battery
 
Hutch said:
If it is just a Sargent Alarm, there should be a square opaque window , either head height or floor level, maybe with a flashing light. That is the sensor.

Under one of the front bunks, there could be a Black box, 6 X4 inches, inside there is a battery, 2 screws and a bolt. To lift the top off. That might need replacing.
Sargent have a write up on their website.
Click to expand...
Cheers Hutch followed your instructions and solved the buzzing thanks very much.
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Back
Top