• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Mikomi 15" LCD

B

Brian-Bear_5094910

Can anyone tell me if they have tried direct connection to the vans 12 volt supply and if so are the little 4 pin din plug that goes into the back of the set easily obtained
 
Maplins and Radio Spares are good sources of uncommon industry standard connectors, and much else.
Click to expand...
Just had a quick look through Maplin online catalogue. A XLR type connector might be what your looking for. The Mikomi tramsformer is rated at 4.16Amps, check the vans d.c. output
 
I have one and it works perfectly on 12 volt. The Din plugs however are very hard to obtain. For some reason I thought the TV came with a 12 volt lead and when I phoned up about it they sent me a complete power supply so I was able to make a lead up from there.

PaulA the lead into the back of the set uses 4 cables, 2 positive and 2 negative, if you open up the power supply you can trace the leads as it is very hard to do with a meter off the Din plug.
 
Hi

I believe that type of din plug is now obsolete,i tried to get some for work and tried Maplins,RS and Farnells but no joy.The best thing to do is cut the cable before the plug and put in a connector so its esy to change to a 12v plug then back to 240v.I bought a Bush lcd from Argos 3 years ago for
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Back
Top