one shot nut torque settin

[lee886]

Hi ive got a avondale caravan 1996 need to get the hubs of bern and got some one shot nuts any one any idea what torque settings need to be when puttin it back togther lookef in hand book but only tells u wheel nut settins thanks lee its on an alco chassis cant seem to find it on therr down load

 

[WoodlandsCamper]

Western Towing give these values on their website:
Alko Hub Nut 1637 & 2051
(WBHN11)
Hub nut for ALKO 1637 & 2051 braked hubs. Torque setting = 290Nm + or - 10Nm (214 lbs/ft + or - 7.5 lbs/ft)
Alko Hub Nut 2361
(WBHN10)
Hub nut for ALKO 2361 braked hub fitted with one piece sealed bearing. Torque setting = 290Nm + or - 10Nm (214 lbs/ft + or - 7.5 lbs/ft)

 

[Sproket]

Lee
Have a look on page 7 of the AlKo Caravan Chassis handbook

 

[lee886]

Any idea what that is in kgs please

 

[WoodlandsCamper]

Have a look on page 7 of the AlKo Caravan Chassis handbook

Looks like Western Towing were right then

 

[Sproket]

Have a look on page 7 of the AlKo Caravan Chassis handbook

Looks like Western Towing were right then

Your lordship, I bow to your speed of fingers....

 

[Sproket]

Any idea what that is in kgs please

If you have a look at this torque converter chart you will be able to check it quite easily.
I would use only a Nm or lbs/ft torque wrench as that is how most of the data is found when searching for it.