Plumbing help please

[orkney]

Hello and thanks for accepting me in this group. I have bought a new vanwhich has been in storage for a while and both taps leak. It may be the inserts so I have 2 new ones coming home. I would like to replace the seals on the swivel tap as well but cannot remove the insert barrel. There seems to be what looks like a roll pin but I cannoy get it to move. I am frightened to break it and thought there must be a trade secret.

Can you assist?

Many thanks in advance

 

[GD485]

Hi Orkney,

I've not stripped these taps but from the photo it looks as though the pin is hollow. Have you tried finding a self tapping screw that will screw into the pin. You could then grasp the screw to pull the pin out.
However I suggest taking the whole tap out of the worktop and looking from the underside to see if the pin can be accessed.

I hope that helps a bit