i have a 1996 eldiss gtx furicano range there is damp pach in bathroom wall boarding black i want to remove both sids trim and reseal i will fit upv sheeting inside when job completed what i want to know is how big a job resealing is and how you do it any help would be great regards paul
reseal back of caravan
- Thread starter paul_374230681
- Start date
hi paul ,quite simple really.took me two days to do both my awning rails last month.1,remove plastic trim in rail.2,undo screws loads of them.3,clean van and rails of with white spirit and razor blade,get all the old mastic of.4,apply non setting bedding mastic to the join of the roof and side panel on the van.5,apply same mastic to rails above and below screw holes in a long continuase line.6,fit rails,get help to hold opposite end up .try not to move them once in place.7,put screws in,any bad holes move screw 1,inch either way .use 1,8th drill bit.8,refit trim. re,seth
There is an interesting article in this month's (February) PC. Their Avondale Wren is having work carried out to remove damp at the front, and it's being done on someone's drive, using normal DIY tools. May give you an insight of what to expect with your washroom problem. Hope this helps!
http://hp-h.com/p/wizard41/[/quote
thank you for all your help but we have had a chat and i think we are going to let the profesionals takle the job so once again thanks i will let you all know how we fair at couplands louth
Facebook
Twitter