Thetford toilet. Converting to electric flush.

[Ken_374360682]

I converted mine two years ago and it works perfectly. The parts needed are :-

Miniature push button.

12volt miniature relay.

12v indicator lamp.

Fiamma water pump.

Sufficient twin 5amp cable. Round not flat.

A friendly electrician if you arent!

The bellows unit can be easily removed and this is used to mount the electrics. a hole is drilled in the floor of the toilet in the corner, a small electric drill can be used. A further hole is drilled in the floor of the external housing for the supply cable. Studying the circuit in your handbook will indicate where to take the supply from. Sillicone sealer is used to seal the cable entry into the toilet. I did not have any leaks at all. If you have any queries, pop them in the forum and I will help.

 

[Legsmaniac_374344731]

I would be interested in more information regarding this adaption, Ken. My wife's disability prevents her from turning the manual flush sometimes that I have to do it for her.

Can you email me more information with photos if possible to administrator@carryoncamping.org

Thanks

 

[Stephen_374341239]

Ken

Is this a Thertford c2 or C200 toilet you have done this to.If its a C200 can you give some more idea of the work done.

Kind regards best wishes Steve.

 

[Legsmaniac_374344731]

Bump.

Still waiting, Ken. 🙂

 

[Stephen_374341239]

Hi Again

can you convert a C200 Thertford manual flush to Eleck and has any body out there dne this???????????????

Steve

 

[Chrissylizzie]

When we bought our new caravan it came with a manual flush. The dealer replaced it with an electric flush one and charged us

 

[Ken_374360682]

Hi Legs'

Sorry for the delay, my wife has been in hospital for a major op and I just havn't been able to do anything. I will get some photo's for you as soon as possible.

Ken

 

[Legsmaniac_374344731]

Cheers, Ken.

Sorry to hear about your wife. Hope all's well.