Toilet flush

[bob h]

Hello I have a lunar quasar 426
My electric toilet flush Just suddenly stopped working I've changed a fuse that was underneath the unit but to no avail any ideas anyone
Thank you

 

[otherclive]

Hello I have a lunar quasar 426
My electric toilet flush Just suddenly stopped working I've changed a fuse that was underneath the unit but to no avail any ideas anyone
Thank you

Could be the switch pcb under the press button. You can peel the flexible top membrane off and access the pcb. Mine gave a problem from day 1 but after I had cleaned the pcb contacts it worked well afterwards. I then lightly lacquered it before putting it all back.

 

[bob h]

Okay thank you I will try that first

 

[otherclive]

Should have also said there are a number of YouTube videos. Trudgians make good caravan ones.

 

[SirRogerFFS]

Had the same problem with ours .C250 4 Boards in 10 years , Ive had my service engineer bye pass it fitted a toggle switch and done away with that board altogether .Removing the board and doing as the previous posts is a good idea too but I begrudge the cost of replacing board s that are corroded
Sir Roger

 

[bob h]

Ok thanks tried with the first reply its all factory glued will have a look at utube though thank you

 

[SirRogerFFS]

Bob H The cover is a reusable cover that allows you to carefully peel of the cover this if yours is a c250 toilet.
Sir Roger