• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Uprated rear springs

Page 3 - Passionate about caravans & motorhome? Join our community to share that passion with a global audience!
Surely the back end of the car pitched up and down just as much when not towing but with the boot filled to the brim?
No idea, I never drove it like that. When I initially complained to the Vauxhall dealer they contacted Vauxhall UK who suggested fitting springs/dampers from one of the German models - this did improve things solo but not towing - I've no idea what the difference was between UK and German models of the Astra but mine was a saloon version, exceedingly rare in the UK.
 
No idea, I never drove it like that. When I initially complained to the Vauxhall dealer they contacted Vauxhall UK who suggested fitting springs/dampers from one of the German models - this did improve things solo but not towing - I've no idea what the difference was between UK and German models of the Astra but mine was a saloon version, exceedingly rare in the UK.
Getting slightly off the thread, we bought a Vauxhall Cavalier Coupe, ex Vauxhall owned, it turned out to be a Hybrids model for the Swedish Market, different everything, mirrors, camshaft, valves, heater matrix, only found out as my uncle was in the experimental section and checked up on the serial numbers for me.

So everything can be different according to areas.
 
It would be unusual for the springs on the left hand side and right on the same axle to have the same spring rates. This is because the kerbweight distribution from wheel to wheel can differ significantly. This must be taken into account when fitting alternative springs.
 
It would be unusual for the springs on the left hand side and right on the same axle to have the same spring rates. This is because the kerbweight distribution from wheel to wheel can differ significantly. This must be taken into account when fitting alternative springs.

Every OEM spring I have ever replaced has had the same part number for both right and left hand side so must be the same.
 
It's not uncommon on front-wheel drive cars for the front springs to be handed because the engine is offset to one side, especially if the engine is offset to the same side as the driver.

Rear-wheel drive cars are more likely to be symmetrical.
 
It's not uncommon on front-wheel drive cars for the front springs to be handed because the engine is offset to one side, especially if the engine is offset to the same side as the driver.

Rear-wheel drive cars are more likely to be symmetrical.

That might well be so, but not in my experience admittedly from many years ago. But surely in terms of the thread and towing, we are discussing rear springs.

John
 

TRENDING THREADS

Latest posts

Back
Top